henan lichen aluminum co.,ltd. You are in our Global Site henan lichen aluminum co.,ltd.
henan lichen aluminum co.,ltd.
henan lichen aluminum co.,ltd.

What Are the Technical Characteristics of Aluminum Circle Production?

Deep processing of an aluminum sheet is already an indispensable technology. An aluminum circle is a product obtained after deep processing of an aluminum sheet. It has a relatively large demand on the market. The appearance of the aluminum circle is bright and beautiful. It is a commonly used material for kitchenware. What are the characteristics of the production technology of the circle? The aluminum circle production process mainly has the following six features:


1. The numerical control is fully automatic

The production line starts from the unwinding of the aluminium foil coil until the entire material is blanked. There is no need for manual contact with any materials in the process, or adjustments, fundamentally eliminating the production safety hazards of general punching and product quality risk.


2. The line can use coil material to directly produce an aluminum circle

The line can use coil material to directly produce aluminum circle without the need for slitting and cross-cutting of the coil material, which reduces the production process, the production cost, and the possibility of damaging the appearance of the coil material.


3. This line makes full use of the width of the coil

The line uses a high-precision servo motor drive system to control and minimize the distance between the aluminum circle and the distance between the aluminum circle and the material edge, radically reduce the amount of waste, and make the raw material usage rate reach 80 % above.


4. The production speed can reach 20-60 pieces per minute, which improves the production efficiency.


5. The diameter range of the aluminum circle can be produced from 85mm to 700mm

Because of the modular mold design, when converting aluminum circle production specifications, the conversion time can be reduced to less than 15 minutes. The diameter range of the aluminum circle can be produced from 85mm to 700mm.


6. The high quality of aluminum circle products is guaranteed

Advanced uncoiling system, six-fold leveling machine, high-rigidity mechanical press, active palletizing system, etc., ensure the high quality of aluminum circle products.